#ifndef HARDWARE_CUSTOM_H
#define HARDWARE_CUSTOM_H
/*
**      $Filename: hardware/custom.h $
**      $Release: 2.04 Includes, V37.4 $
**      $Revision: 36.4 $
**      $Date: 90/11/05 $
**
**      Offsets of Amiga custom chip registers
**
**      (C) Copyright 1985-1999 Amiga, Inc.
**          All Rights Reserved
*/

#ifndef EXEC_TYPES_H
#include "exec/types.h"
#endif /* EXEC_TYPES_H */



/*
 * do this to get base of custom registers:
 * extern struct Custom custom;
 */


struct Custom {
    UWORD   bltddat;
    UWORD   dmaconr;
    UWORD   vposr;
    UWORD   vhposr;
    UWORD   dskdatr;
    UWORD   joy0dat;
    UWORD   joy1dat;
    UWORD   clxdat;
    UWORD   adkconr;
    UWORD   pot0dat;
    UWORD   pot1dat;
    UWORD   potinp;
    UWORD   serdatr;
    UWORD   dskbytr;
    UWORD   intenar;
    UWORD   intreqr;
    APTR    dskpt;
    UWORD   dsklen;
    UWORD   dskdat;
    UWORD   refptr;
    UWORD   vposw;
    UWORD   vhposw;
    UWORD   copcon;
    UWORD   serdat;
    UWORD   serper;
    UWORD   potgo;
    UWORD   joytest;
    UWORD   strequ;
    UWORD   strvbl;
    UWORD   strhor;
    UWORD   strlong;
    UWORD   bltcon0;
    UWORD   bltcon1;
    UWORD   bltafwm;
    UWORD   bltalwm;
    APTR    bltcpt;
    APTR    bltbpt;
    APTR    bltapt;
    APTR    bltdpt;
    UWORD   bltsize;
    UBYTE   pad2d;
    UBYTE   bltcon0l;  /* low 8 bits of bltcon0, write only */
    UWORD   bltsizv;
    UWORD   bltsizh;   /* 5e */
    UWORD   bltcmod;
    UWORD   bltbmod;
    UWORD   bltamod;
    UWORD   bltdmod;
    UWORD   pad34[4];
    UWORD   bltcdat;
    UWORD   bltbdat;
    UWORD   bltadat;
    UWORD   pad3b[3];
    UWORD deniseid;   /* 7c */
    UWORD   dsksync;
    ULONG   cop1lc;
    ULONG   cop2lc;
    UWORD   copjmp1;
    UWORD   copjmp2;
    UWORD   copins;
    UWORD   diwstrt;
    UWORD   diwstop;
    UWORD   ddfstrt;
    UWORD   ddfstop;
    UWORD   dmacon;
    UWORD   clxcon;
    UWORD   intena;
    UWORD   intreq;
    UWORD   adkcon;
    struct  AudChannel {
      UWORD *ac_ptr; /* ptr to start of waveform data */
      UWORD ac_len;    /* length of waveform in words */
      UWORD ac_per;   /* sample period */
      UWORD ac_vol;   /* volume */
      UWORD ac_dat;   /* sample pair */
      UWORD ac_pad[2];        /* unused */
    } aud[4];
    APTR    bplpt[8];
    UWORD   bplcon0;
    UWORD   bplcon1;
    UWORD   bplcon2;
    UWORD   bplcon3;
    UWORD   bpl1mod;
    UWORD   bpl2mod;
    UWORD   bplhmod;
    UWORD   pad86[1];
    UWORD   bpldat[8];
    APTR    sprpt[8];
    struct  SpriteDef {
      UWORD pos;
      UWORD ctl;
      UWORD dataa;
      UWORD datab;
    } spr[8];
    UWORD   color[32];
    UWORD htotal;
    UWORD hsstop;
    UWORD hbstrt;
    UWORD hbstop;
    UWORD vtotal;
    UWORD vsstop;
    UWORD vbstrt;
    UWORD vbstop;
    UWORD sprhstrt;
    UWORD sprhstop;
    UWORD bplhstrt;
    UWORD bplhstop;
    UWORD hhposw;
    UWORD hhposr;
    UWORD beamcon0;
    UWORD hsstrt;
    UWORD vsstrt;
    UWORD hcenter;
    UWORD   diwhigh;    /* 1e4 */
};

#ifdef ECS_SPECIFIC

/* defines for beamcon register */
#define VARVBLANK     0x1000  /* Variable vertical blank enable */
#define LOLDIS                0x0800  /* long line disable */
#define CSCBLANKEN    0x0400  /* redirect composite sync */
#define VARVSYNC      0x0200  /* Variable vertical sync enable */
#define VARHSYNC      0x0100  /* Variable horizontal sync enable */
#define VARBEAM       0x0080  /* variable beam counter enable */
#define DISPLAYDUAL   0x0040  /* use UHRES pointer and standard pointers */
#define DISPLAYPAL    0x0020  /* set decodes to generate PAL display */
#define VARCSYNC      0x0010  /* Variable composite sync enable */
#define CSBLANK       0x0008  /* Composite blank out to CSY* pin */
#define CSYNCTRUE     0x0004  /* composite sync true signal */
#define VSYNCTRUE     0x0002  /* vertical sync true */
#define HSYNCTRUE       0x0001  /* horizontal sync true */

/* new defines for bplcon0 */
#define USE_BPLCON3     1

/* new defines for bplcon2 */
#define BPLCON2_ZDCTEN                (1<<10) /* colormapped genlock bit */
#define BPLCON2_ZDBPEN                (1<<11) /* use bitplane as genlock bits */
#define BPLCON2_ZDBPSEL0      (1<<12) /* three bits to select one */
#define BPLCON2_ZDBPSEL1      (1<<13) /* of 8 bitplanes in */
#define BPLCON2_ZDBPSEL2        (1<<14) /* ZDBPEN genlock mode */

/* defines for bplcon3 register */
#define BPLCON3_EXTBLNKEN     (1<<0)        /* external blank enable */
#define BPLCON3_EXTBLKZD      (1<<1)        /* external blank ored into trnsprncy */
#define BPLCON3_ZDCLKEN       (1<<2)        /* zd pin outputs a 14mhz clock*/
#define BPLCON3_BRDNTRAN      (1<<4)        /* border is opaque */
#define BPLCON3_BRDNBLNK        (1<<5)        /* border is opaque */

#endif  /* ECS_SPECIFIC */

#endif  /* HARDWARE_CUSTOM_H */