#ifndef RESOURCES_BATTMEMBITSSHARED_H
#define RESOURCES_BATTMEMBITSSHARED_H 1
/*
**      $Filename: resources/battmembitsshared.h $
**      $Release: 2.04 Includes, V37.4 $
**      $Revision: 1.1 $
**      $Date: 90/05/25 $
**
**      BattMem shared specific bit definitions.
**
**      (C) Copyright 1989-1999 Amiga, Inc.
**              All Rights Reserved
*/


/*
 * Shared bits in the battery-backedup ram.
 *
 *      Bits 64 and above
 */

/*
 * SHARED_AMNESIA
 *
 *              The battery-backedup memory has had a memory loss.
 *              This bit is used as a flag that the user should be
 *              notified that all battery-backed bit have been
 *              reset and that some attention is required. Zero
 *              indicates that a memory loss has occured.
 */

#define BATTMEM_SHARED_AMNESIA_ADDR    64
#define BATTMEM_SHARED_AMNESIA_LEN      1


/*
 * SCSI_HOST_ID
 *
 *              a 3 bit field (0-7) that is stored in complemented form
 *              (this is so that default value of 0 really means 7)
 *              It's used to set the A3000 controllers SCSI ID (on reset)
 */

#define BATTMEM_SCSI_HOST_ID_ADDR      65
#define BATTMEM_SCSI_HOST_ID_LEN        3


/*
 * SCSI_SYNC_XFER
 *
 *              determines if the driver should initiate synchronous
 *              transfer requests or leave it to the drive to send the
 *              first request.  This supports drives that crash or
 *              otherwise get confused when presented with a sync xfer
 *              message.  Default=0=sync xfer not initiated.
 */

#define BATTMEM_SCSI_SYNC_XFER_ADDR    68
#define BATTMEM_SCSI_SYNC_XFER_LEN      1


#endif /* RESOURCES_BATTMEMBITSSHARED_H */